Temperature Test Chamber

Temperature Test Chambers for High and Low Temperature Testing

ALP TECHNOLOGY offers temperature test chambers for evaluating product reliability under controlled high and low temperature conditions. Our range includes high-low temperature chambers with workroom dimensions from 450 × 450 × 500 mm to 1000 × 1000 × 1000 mm, as well as compact benchtop models in 25L and 64L capacities.

With temperature ranges extending from -70°C to +150°C on the high-low series and programmable control options, these chambers support temperature testing for electronic components, automotive parts, aerospace components, new energy batteries, and other industrial products.

 
 

Temperature Test Chamber Models and Specifications

Different sample sizes and testing requirements call for different chamber capacities. ALP provides high-low temperature and benchtop configurations to accommodate different laboratory and production testing environments.

High-low Temperature Chamber

The high-low temperature test chamber series includes four models with different workroom dimensions.

Model Workroom Dimensions (W × D × H) Exterior Dimensions (W × D × H)
ALP-GDW100 450 × 450 × 500 mm 1050 × 970 × 1760 mm
ALP-GDW225 500 × 600 × 750 mm 1050 × 1020 × 2000 mm
ALP-GDW500 800 × 700 × 900 mm 1320 × 1320 × 2170 mm
ALP-GDW1000 1000 × 1000 × 1000 mm 1700 × 1520 × 2310 mm

The available temperature range configurations are:

  • A: -20°C to +150°C
  • B: -40°C to +150°C
  • C: -60°C to +150°C
  • D: -70°C to +150°C

The series has temperature fluctuation of ≤±0.5°C and temperature uniformity of ≤±2°C. The temperature rise rate is 1.0–3.0°C/min, while the temperature fall rate is 0.7–1.0°C/min.

Power consumption at -40°C varies by model:

Model Power at -40°C
ALP-GDW100 4.5 kW
ALP-GDW225 5.5 kW
ALP-GDW500 8.0 kW
ALP-GDW1000 10.0 kW

Benchtop Temperature Test Chamber

For smaller samples and laboratory environments with limited floor space, ALP offers 25L and 64L benchtop temperature test chambers.

Parameter 25L Model (ALP-TWS-25) 64L Model (ALP-TWS64)
Interior Dimensions (W × D × H) 250 × 300 × 350 mm 400 × 320 × 500 mm
Exterior Dimensions (W × D × H) Approx. 460 × 700 × 760 mm Approx. 730 × 1440 × 1180 mm
Temperature Range -40°C to +150°C -40°C to +150°C
Temperature Fluctuation ±0.5°C ±0.5°C
Temperature Uniformity ≤2°C ≤2°C
Temperature Deviation ±2°C ±2°C
Heating Rate (Average, No Load) 1–3°C/min 1–3°C/min
Cooling Rate (Average, No Load) 0.7–1°C/min 0.7–1°C/min

The benchtop series uses a SUS304 stainless steel interior and a cold-rolled steel exterior with electrostatic spray coating. Each model has two height-adjustable sample shelves and a side-mounted Φ50 mm test port.

Programmable Temperature Control and Test Connections

The programmable temperature test chamber configurations feature touch-screen controllers with fixed-value and programmable running modes. The high-low temperature series supports multi-segment test profiles of up to 1000 steps.

The controller supports RS-485, USB, and LAN communication interfaces for PC connection and online operation.

For powered testing, the chamber's cable port allows electrical connections to be routed to samples inside the workroom. The high-low series offers 25 mm, 50 mm, and 100 mm cable port options. The benchtop technical specification lists one Φ50 mm side test port.

The high-low series also features a multi-layer anti-fog tempered glass observation window with electric heating film, while the benchtop series provides a door-mounted observation window.

Applicable Temperature Testing Standards

The high-low temperature chamber product page lists the following applicable test standards:

  • IEC 60068-2-1 / GB/T 2423.1: Cold test
  • IEC 60068-2-2 / GB/T 2423.2: Dry heat test
  • MIL-STD-810G / GJB 150: High and low temperature test methods
  • ISO 16750-4: Environmental conditions and testing for road vehicle electrical and electronic equipment
  • IEC 60068-3-5: Confirmation of the performance of temperature chambers

Construction and Safety Features

The high-low temperature chamber uses a SUS304 stainless steel interior and a powder-coated cold-rolled steel exterior. Its heating and refrigeration systems support the specified operating temperature range.

The equipment includes over-temperature protection, compressor overload and overpressure protection, and independent over-temperature alarms.

The benchtop models use hard polyurethane foam and glass fiber insulation, forced air circulation with a centrifugal fan, and a fully enclosed refrigeration compressor.

Customized Temperature Test Chamber Solutions

ALP TECHNOLOGY provides customized environmental testing solutions for different product and laboratory requirements.

Customization projects can be discussed around chamber dimensions, temperature requirements, test connections, and other non-standard system configurations. The final configuration is subject to technical review and confirmation.

Engineering and After-Sales Support

ALP TECHNOLOGY provides environmental testing equipment for customers in automotive, aerospace, electronics, renewable energy, medical device, and industrial machinery sectors.

Our engineering team supports test protocol development and customized system integration. After-sales services include training, maintenance, equipment upgrades, and remote diagnostics.

Request a Temperature Test Chamber Quotation

Send us your required temperature range, sample dimensions, testing profile, and estimated quantity. Our team can recommend a suitable temperature test chamber model and provide a configuration proposal and quotation based on your testing requirements.

With abundant experience, we are one of the most reliable temperature test chamber manufacturers and suppliers in China. Please feel free to buy advanced temperature test chamber for sale here from our factory. All customized products are with high quality and competitive price.

high temperature chamber, temperature exposure chamber, temperature test chamber for environmental testing

whatsapp

Phone

E-mail

Inquiry

Bag