temperature test chamber



Purpose

This   series is applicable for the testing of the indices of the spaceflight and   aviation products, information electronic instruments and meters, materials,   electrical and electronic products, and electronic and electrical components   and parts in high-temperature, low-temperature, humid and heat environment.

Chamber   Structure

The   inner bladder of the chamber is made of SUS304 stainless steel plate while   the outer bladder is made of A3 steel plate sprayed with plastic.
  A large observation window is set on the chamber door.
  Double-layer high-temperature resistant and high-intensity seal is adopted   between the chamber door and the chamber body in order to ensure the   obturation of the testing area.
  A test hole with 25mm, or 50mm or 100mm diameter is set on the   left of the chamber body.
  A high-quality fixable PU moving wheel is adopted on the bottom of the test   chamber.

Control   System

The   temperature and humidity control instrument adopts imported South Korean   TEMI-800 meter with Chinese and English operation interface.
  The capacity of 100 sets of programmable 1,000-section 999-circular steps is   available, and the set maximal time every section is 99h 59min.
  There is RS-232or RS-485 communication interface and can connect to PC for   corresponding operation.

Specs   & Technical Parameters

Model  

GDJS-100  

GDJS-225

GDJS-500

GDJS-800  

Workroom   Dimensions (cm)

45*45*50

50*60*75

70*80*90  

80*100*100

Exterior   Dimensions (cm)

105*97*176

105*102*200

132*132*217  

147*152*231

Power

6.0(KW)

7.0(KW)

13.5(KW)  

15.0(KW)

Temperature Range

A:-20150 B:-40150 C:-60150 D:-70150

Humidity Range

30   ~ 98% R.H

Fluctuation/Evenness  

≤   ±0.5 / ≤ ±2  

Humidity   Deviation

+2,   -3% R.H

Temperature   Rise Speed

1.0~3.0/min

Temperature   Fall Speed

0.7~1.0/min  




Online Service
CONTACT
US
Name:
Email:
Mobile:
Country:
Comments:
手机号码:
手机验证码:
验证码:请输入下图中的字符