humidity test chamber


Purpose

This series is applicable for the testing of the indices of the spaceflight and aviation products, information electronic instruments and meters, materials, electrical and electronic products, and electronic and electrical components and parts in high-temperature, low-temperature, humid and heat environment.

Chamber Structure

The inner bladder of the chamber is made of SUS304 stainless steel plate while the outer bladder is made of A3 steel plate sprayed with plastic.
A large observation window is set on the chamber door.
Double-layer high-temperature resistant and high-intensity seal is adopted   between the chamber door and the chamber body in order to ensure the   obturation of the testing area.
A test hole with 25mm,or 50mm or 100mm diameter is set on the   left of the chamber body.
A high-quality fixable PU moving wheel is adopted on the bottom of the test   chamber.

Control System

The temperature and humidity control instrument adopts imported South Korean TEMI800 meter with Chinese and English operation interface.
The capacity of 100 sets of programmable 1,000-section 999-circular steps is   available, and the set maximal time every section is 99h 59min.
There is RS-232or RS-485 communication interface and can connect to PC for   corresponding operation.

Specs & Technical Parameters

Model(cm)

GDWS-100

GDWS-225

GDWS-500

GDWS-800

Workroom Dimensions 

45*45*50

50*60*75

70*80*90

80*100*100

Exterior Dimensions 

105*97*176

105*102*200

132*132*217

147*152*231

Power

6.0(KW)

7.0(KW)

13.5(KW)

15.0(KW)

Temperature Range

A:-20150 B:-40150 C:-60150 D:-70150

Humidity Range

30~98% R.H

Fluctuation/Evenness

≤±0.5/≤±2  

Humidity Deviation

+2, -3% R.H

Temperature Rise Speed

1.0~3.0/min

Temperature Fall Speed

0.7~1.0/min  


Online Service
CONTACT
US
Name:
Email:
Mobile:
Country:
Comments:
手机号码:
手机验证码:
验证码:请输入下图中的字符